በዚህ ጽሑፍ ውስጥ KPAL የሂደቱን ያሳየዎታል ፒ.ፒ.ኤፍ. installnation,which is a very longand complex procedure and will differ on every car as every panel is different. 

ባጁን ያስወግዱ

The reason for removing the Badge is so you can delete the emblem out of the software and you can wrap the film behind it,and you won’t have a cut out line going around it——just leave a clean finish!

አልኮሆል መጥረግ

ሰውነትን ሙሉ በሙሉ ለማጽዳት አልኮልን ይጠቀሙ, እና ክፍተቶቹን አይተዉ, ይህ ምንም አይነት የሸክላ ቅሪትን ለመከላከል ነው.

የፕሮግራም ቅንጥብ

After the cleaning is finished,we can start toedit the pattern with the የፊልም ፕሮግራም መቁረጥ,and then edit the accessories.You can leave the parts you need in the program and delete the parts you don't need to install.And then cut the stealth ppf off on the plotter——at the same time,it must be ensured that the membrane is absolutely clean.

ማመልከት እንደሚቻል

ብዙ ይረጩ ጄል PPF ወዲያውኑ ከመኪናው ቀለም ጋር በጥብቅ እንዳይጣበቅ በማጣበቂያው ንብርብር ላይ።

Next lay the film on the part of you want to start, and make sure the edges of the film line up with the car body gap.

Use a scraper to squeeze the gel down from the middle to the edge——this is to ensure that it can be firmly attached to the car body to effectively protect the car paint.

If there is a deviation in the position, you can gently ፊልሙን መልሰው ይላጡ, እና እንደገና ለመጫን በማጣበቂያው ንብርብር ላይ ጄል መርጨትዎን ይቀጥሉ.

Re-check

መኪናዎን ብዙ ጊዜ ይፈትሹ ጠርዞቹን ከጠቀለለ በኋላ- ቆሻሻ ገብቷል / አንድ ክፍል አምልጦሃል / ባጁን መልሰው አስቀመጡት?

After completing the above steps, you can get a brand new car again!Hopefully,this text will help some installers out there!If you have any questions,you can እዚህ ጠቅ ያድርጉto leave an inquiry to KPAL！